Proof, not promises.
A selection of vision and automation systems SolVIS has designed and deployed.
Seed ProBox Contamination Inspection
SolVAI segmentation inspection that checks inside every returning seed probox for physical and treatment contamination before it is filled, with the fill interlocked until the probox passes.
Read case study ›Aircraft Windshield Inspection
Automated optical inspection of aircraft windshields.
Coming soon
DE Blister Die-Cutting
Custom tooling that opens sealed dosimeter blister packs in one repeatable cut: a steel-rule die, a machined cut block, and a hinged carrier that locates every pack the same way.
Read case study ›
Continuous Floor Assembly
Thirty-one axes of coordinated motion with SCADA and MES integration, two inkjet printers, and six encoders.
Read case study ›
Component Reel Inventory & Labeling
Deep-learning OCR that reads the part and lot data off component reels from any supplier, in any label format, to bring them into inventory and re-label them to one standard.
Read case study ›
Tissue Membrane Inspection
A vision system that inspects every human tissue membrane allograft for defects and confirms its size, with each result classified, mapped, and recorded before release.
Read case study ›
Door Surface Inspection
Door surface inspection using two 3D profilers and a line-scan camera, finding surface defects with machine learning and verifying dimensions within tolerance.
Read case study ›
High-Speed Can Inspection & Traceability
Deep-learning OCR reading the code stamped into every can bottom at line speed, tied to label and carton barcode verification so the right label goes on the right product.
Read case study ›
Steering Rack Inspection
Fourteen assembly checks on every rack in under ten seconds, from twelve camera positions, with pass/fail data written into the plant traceability system.
Read case study ›
Alternator Weld Inspection
Deep-learning inspection of the weld bead on every copper winding lead, catching missing welds, malformed beads, and pitting before the part leaves the cell.
Read case study ›
Can Opening Rivet Inspection
A vision retrofit that checks the position of the easy-open rivet on every can at up to 450 a minute, passing centered rivets and rejecting offset ones through the line's existing reject.
Read case study ›
Extruded Pipe Verification
Reads the printed ID and sizing code on extruded pipe and checks its outside diameter at line speed, with a stack-light alert the moment either drifts out of spec.
Read case study ›